Dec 14, 2024

Why remote control parking lock cannot be raised?

Leave a message

‌The main reasons and solutions for the remote control parking lock not being raised are as follows‌:

‌Battery is dead or plug is loose‌: Check whether the battery is fully charged and make sure the plug is tightly connected. If the battery is dead, you need to charge it; if the plug is loose, reconnect the plug. ‌
‌Limit switch shrapnel is not opened‌: Check whether the limit switch shrapnel is stuck. If it is not opened, just push it away.
‌Bracket deformation‌: Bracket deformation may cause the parking lock to be unable to rise and fall normally. The deformed bracket needs to be replaced.
‌Foreign objects in the base are blocked‌: Clear foreign objects in the base to ensure smooth movement of the bracket.
‌Motor damage‌: If the motor fails, the motor needs to be replaced.
‌Remote control problem‌: Check whether the remote control battery is sufficient. If the remote control is damaged or has no battery, replace the battery or remote control.
‌Control code is cleared‌: Re-code. At the moment of inserting the battery, press and hold the two buttons of the remote control for 3-5 seconds at the same time. Release them when you hear two consecutive beeps. ‌
‌Computer motherboard failure‌: Replace the computer motherboard.
‌Lock core damaged‌: Find the lock core, gently unscrew the screws, remove them and return the lock to open.
‌Lock body deformed due to impact‌: Try to unlock from the inside. If external force is required, use a light tool such as a hammer, but avoid excessive damage.

Send Inquiry