What is the minimum installation space required for electric rising bollards?
Hey there! I'm a supplier of Electric Rising Bollards, and I often get asked about the minimum installation space for these nifty security devices. So, let's dive right in and break it down.
First off, electric rising bollards are super useful. They're great for controlling access to driveways, parking lots, and even restricted areas. Whether you're looking for Automatic Rising Bollards for Driveways or something more heavy - duty like Electro - hydraulic Rising Bollards, the installation space is a crucial factor.
Factors Affecting the Installation Space
Bollard Dimensions
The size of the bollard itself is the most obvious factor. Electric rising bollards come in different diameters and heights. A typical bollard might have a diameter ranging from 100mm to 200mm. The height when fully raised can be anywhere from 600mm to 1200mm.
You need to account for the bollard's diameter when planning the installation space. For example, if you have a bollard with a 150mm diameter, you'll need at least a 150mm - wide hole in the ground for it to fit. But it's not just about the hole size. You also need some extra space around the bollard for installation and maintenance purposes. A general rule of thumb is to add an additional 50mm to 100mm of clearance around the bollard. So, for a 150mm - diameter bollard, you might want a hole that's around 250mm to 350mm in diameter.
Mounting and Base Requirements
Most electric rising bollards need a solid base for proper installation. This base can be made of concrete, and its size depends on the bollard's specifications. A small - to - medium - sized bollard might require a concrete base that's around 500mm x 500mm and 300mm deep. Larger bollards, especially those designed for high - security applications, could need a base that's even bigger.
You also need to consider the space for the mounting hardware. Some bollards have flanges or brackets that extend beyond the bollard's diameter. Make sure you measure these additional parts when calculating the total installation space.

Operational Clearance
Once the bollard is installed, it needs room to operate. When the bollard rises and lowers, it shouldn't hit any nearby objects. You need to leave enough space above the bollard for it to fully extend. Also, there should be no obstructions around the sides that could interfere with its movement.
If you're installing multiple bollards side by side, you need to consider the spacing between them. A common spacing is around 1.5m to 2m, depending on the application. For example, if you're using bollards to control vehicle access, this spacing allows vehicles to pass through safely when the bollards are down.
Minimum Installation Space for Different Types of Electric Rising Bollards
Residential Use
For Automatic Rising Bollards for Driveways, the minimum installation space is relatively small. A single bollard might need a hole that's about 200mm in diameter and 600mm deep. The concrete base could be around 400mm x 400mm and 200mm deep.
If you're installing two bollards at the entrance of a driveway, you'll need to space them about 1.5m apart. This gives enough room for a standard - sized vehicle to enter and exit.
Commercial and Industrial Use
In commercial and industrial settings, the requirements are a bit more demanding. Electro - hydraulic Rising Bollards are often used in these situations because they can handle heavier loads.
A single electro - hydraulic bollard might need a hole that's 300mm in diameter and 800mm deep. The concrete base could be 600mm x 600mm and 400mm deep. When installing multiple bollards in a row, you might want to space them 2m apart to accommodate larger vehicles like trucks.
Planning the Installation
Before you start digging holes for your electric rising bollards, it's a good idea to do a site survey. This involves measuring the area where you want to install the bollards and checking for any underground utilities like water pipes, gas lines, or electrical cables.
You also need to think about the overall layout. For example, if you're installing bollards in a parking lot, you need to make sure they don't block pedestrian walkways or other important areas.
Conclusion
So, to sum it up, the minimum installation space for electric rising bollards depends on several factors, including the bollard's dimensions, mounting requirements, and operational clearance. For residential use, you can get away with a relatively small installation space, but for commercial and industrial applications, you'll need more room.
If you're thinking about purchasing electric rising bollards, it's important to plan the installation carefully. Make sure you have enough space and that you follow all the manufacturer's guidelines.
If you're interested in buying Electric Rising Bollards for your project, feel free to reach out to us. We're here to help you choose the right bollards and make sure the installation goes smoothly.
References
- Industry standards for electric rising bollard installation
- Manufacturer's specifications for various electric rising bollards
